ALL WILD 1 INC. CHUBBY® BARS NOW ACCEPT ELECTRONIC
THROTTLE BY WIRE.
CHUBBY® BARS ARE NOW MADE TO WORK WITH HYDRAULIC CLUTCH CONTROLS AND NEARLY ALL CUSTOM CONTROLS WITHOUT
MODIFICATION, CONTROLS CAN BE ROTATED AND POSITIONED ON BOTH SIDES FOR OPTIMUM COMFORT AND CONTROL.
|
Dimension Chart |
Testimonials |
Chubby® Bars & More |
|
WILD 1 CHUBBY® BEACH BAR Spectacular custom Chubby® Beach Bars for ROAD KING,
HERITAGE, FATBOY & CUSTOMS; with super fluid bends
and perfect hand / wrist position for comfort and control. Show chrome
plated, knurled and set up for electronic throttle and internal wiring. Retail Price, WO550, $214.95 Retail Price, WO551, $214.95 |
 WO550 ON '04 ROAD KING CUSTOM GO TO WO551 ON SPRINGER HERITAGE |
 |
WILD 1 CHUBBY® FLHT/C BAGGER BAR. PART # WO575Custom designed for the FLHT® & FLHTC® Electra Glide® to enhance
rider comfort. Depending on rotation when mounted 1.0" - 2.5" more end
rise and 1.5" - 2.5" more pullback than the stock bars. An awesome look and
they provide much better, ergonomic hand / wrist position for enhanced comfort,
leverage and control. The grips are still positioned behind the fairing and they
work with the stock cables, brake line and wiring in most cases. Pre drilled
for internal wiring, accepts new electronic throttle,
knurled and show chrome plated. Retail Price, $214.95 |
||
|
WILD 1 CHUBBY® SPRINGER PULLBACK DRAG BAR, patent pending. PART # WO565 Custom Chubby® Springer Drag
Bars, the first ever one piece pullback drag bars that mount directly
to the factory Springer front end on FXSTS, FXSTSB & FLSTS. The 6.0"
pullback risers are 4.75" on center and feature Wild 1's exclusive
integrated mounting assembly with built in vibration dampers. A
sensational custom look and at 30.5" wide with a 4.0" end rise and
a 11.0" pullback, they provide the optimum rider hand and wrist positioning
for maximum comfort and control. Awesome 1 1/4" thick with smooth polished
riser welds, a brilliant show chrome finish, pre drilled for internal wiring
and work with stock and most custom controls and stock cables, brake line
and wiring. PICS ON FXSTS & FLSTS TECH TIPS-INTERNAL WIRING |
|
||||
  WO560 ON FXST WO560 ON FXDL WO560 ON DEUCE WO560 ON FLSTF WO560 ON FXDWG WO560 MORE INFO! TECH TIPS-INTERNAL WIRING |
CHUBBY® LOWPROFILE DRAG BAR Custom Chubby® Low Profile
Built in Riser Drag Bars. Designed for the ultimate fit on custom
frames with additional rake and custom stretch / rake frames. 30.5"
wide, with a 14.5" pullback and 4.0" end rise. The rotation / angle
of top bar compensates for additional rake and provides optimum
hand and wrist placement. An awesome fit on Softail models
(FXST, Deuce, Fatboy, Heritage) FXDWG, all Dyna models & XL
models, they provide a super low profile look with maximum pullback.
A great choice for riders that need additional pullback on stock rake
bikes. They are a full 1 1/4" Thick with smooth polished riser welds,
a brilliant show chrome finish, predrilled for internal wiring and work
with stock & most custom controls. Work with stock cables, brake
line & wiring on most models.  |
CHUBBY® R.K. BARS Custom Chubbys®, Specifically Designed for the Road King T.M..
and Stretch Frame Custom Bikes. The Ultimate in Comfort & Control for Riders of Average Height and Under. They are 32.5" Wide with Fluid Bends and a 16.0" Pullback that Puts You In The Comfort Zone!!! No More Back, Neck and Shoulder Aches from Leaning to Reach Your Bars. Get the Best in Style & Comfort, Custom
1 1/4" Thick, Knurled, Pre Drilled for Internal Wiring, accepts new electronic throttle with a Brilliant Show Chrome Finish. Use Your Stock Controls, Cables, Brake Line & Wiring.
ROAD KING IS A REGISTERED TRADEMARK OF HARLEY DAVIDSON CORP. |
*Attention Road King Owners
|
||
 WO518 ON ROAD KINGS WO518 ON FATBOYS & HERITAGE WO518 ON CUSTOMS WO518 ON FXDWG SEE COMPARISON WO508 & WO518 TECH TIPS FOR INSTALLATION ON ROAD KINGS |
CHUBBY® R.K. II BARS Custom Chubbys®, Specifically
Designed for the Road King, Stretch Frame Custom Bikes and Riders of Average
Height and Above. They are 35.5" Wide, have a 14.25" Pullback with Fluid
Bends that Set You in the Optimum Riding Position with Hand & Wrist Placement
for Maximum Comfort & Control!!! Custom 1 1/4" Thick, Knurled, Pre Drilled
for Internal Wiring, accepts new electronic throttle with a Brilliant Show Chrome Finish. Use Your Stock
Controls, Cables, Brake Line & Wiring. |
||||
|
CHUBBY® PULLBACK DRAG BARS Custom 1 ¼" thick with smooth polished riser welds and pre drilled for internal wiring.
They are 30.5" wide with superior bends for comfort and control. Pullback risers are
spaced 3.5" on center for standard triple trees, threaded ½" x 13. They clear the tank
and dash on all stock model bikes and work with the stock cables, brake line and wiring
on most models. |
 WO500 ON FXST & FXSTD / DEUCE WO500 ON DYNA'S: FXDWG, FXDL WO500 ON XL & CUSTOM BIKES WO501 ON FXR & FXSTC WO501 ON DEUCE WO501 ON DYNA'S: FXDWG, FXD WO501 ON FATBOYS WO501 ON CUSTOM BIKES & FX SHOVEL WO507 ON CUSTOMS & FXDWG TECH TIPS - INTERNAL WIRING |
||||
 WO511 ON SOFTAIL |
CHUBBY® DRAGSTER BAR The absolute best bends for style, comfort and control. 30.5"
wide x 1 1/4" thick, pre drilled for internal wires, and
show chrome plated. They look awesome with stock risers or Wild
1 Chubby® Risers and Wild
1 Billet Top Clamp. Like all Wild 1 Chubby®
Bars they work with most grips and most controls. |
||||
|
PHYSCO CHUBBY® CHOPPER DRAGS 8" Built in Straight Riser Drags, 30.5" Wide. A full
1 1/4" Thick with Smooth Polished Riser Welds, a Brilliant
Show Chrome Finish and Pre Drilled for Internal Wiring. Chopper
Chubby® Drag Bars transform the look from stocker to Chopper,
add Balance to the Front End by maintaining the Thick lines from the
Forks right up through the Grips. Work with the stock Controls, Grips,
Cables, Brake Line & Wiring on most models. |
 WO562 ON WILD 1 CUSTOM WO562 ON XL CHOPPER TECH TIPS - INTERNAL WIRING |
||||
 WO563 ON FXSTC WO563 ON CHOPPER TECH TIPS - INTERNAL WIRING |
PHYSCO CHUBBY® CHOPPER DRAGS 10.0" Built in Straight Riser Drags, 30.5" Wide. A full
1 1/4" Thick with Smooth Polished Riser Welds, a Brilliant
Show Chrome Finish and Pre Drilled for Internal Wiring. Chopper
Chubby® Drag Bars transform the
look from stocker to Chopper, add Balance to the Front End by maintaining
the Thick lines from the Forks right up through the Grips. Work with the
stock Controls, Grips, Cables, Brake Line & Wiring on most models. |
||||
|
CHUBBY® KNUCKLE BAR WO503 Chubbys® are super low & wide for a cool custom look. Great for
Fatboy®, Heritage®, FLH® Shovel models & custom bikes. Work with
the stock cables, brake line & wiring. |
 WO504 ON FATBOY'S & DEUCE WO504 ON ROAD KING & CUSTOMS WO503 ON FATBOY, HERITAGE, DEUCE & CUSTOMS |
||||
 WO513 ON HERITAGE, FXDWG & FXE WO513 ON '03 ROAD KING WO513 ON '04 ROAD KING CUSTOM |
CHUBBY® 8.5" BABY APES The perfect custom replacement for the stock buckhorns. Chubby®
8.5" Baby Apes maintain the stock height but put your hands
& wrists in the perfect position for comfort and control. Like
all Chubbys®, they are 1/4" thick, pre drilled for internal
wires, kunurled, accepts new electronic throttle, show chrome plated and work with most grips, stock risers,
stock controls and some custom controls. For the ultimate combo
use our Chubby® Risers and Billet Top Clamp. |
||||
|
CHUBBY® 10" APES For Those who want apes but don't want them too tall, here's
your custom solution. Like all Chubbys®, at a full 1 1/4"
thick they maintain the line from your fork tubes right up through
the grips. Pre drilled for internal wires, knurled, accepts new electronic throttle
and show chrome plated
for a sensational look. Fluid bends put your hands and wrist
in the ultimate position for comfort and control. |
 WO515 ON NIGHT TRAIN & CUSTOMS WO515 ON HERITAGE WO515 ON ROAD KINGS WO515 ON '04 FLHRS ROAD KING CUSTOM WO515 ON ROAD GLIDE |
||||
 WO502 ON HERITAGE, FXDWG & FLH WO502 ON FATBOYS WO502 ON ROAD KINGS WO509 ON ROAD KING & DEUCE WO509 ON DYNA WIDE GLIDE WO509 ON HERITAGE, FATBOY & FXSTC WO509 ON ROAD GLIDE |
CHUBBY® APES Awesome Apes, In 12.5" And 16" Rise. Sensational
Looking Full 1 1/4" Thick, With A Brilliant Show Chrome
Finish, Knurled, accepts new electronic throttle And Pre Drilled For Internal Wiring. Superior Bends, Keep
Your Arms And Wrists At The Best Angle For Control And Comfort.
Use Your Stock Risers Or Better Yet, A Set Of Chubby® Risers
And A Wild1 Billet Top Clamp.
|
||||
|
PHYSCO CHUBBY® 18.0" APES Wicked looking custom Chubbys®
designed just right for tall riders. Precision bends finely tuned to
position the rider's arms and wrists at the optimum angle for maximum
comfort and control. 1 1/4" Thick, Knurled, Pre Drilled for Internal
Wiring, accepts new electronic throttle with a Brilliant Show Chrome Finish. Work with stock and most
custom controls, grips, risers and top clamps. |
 WO570 ON FXSTD WO570 ON '04 ROADKING |
||||
 WO571 ON FXSTC & FLSTF WO571 ON HERITAGE & FXSTB |
PHYSCO CHUBBY® 20.0" APES These bad boy custom Chubbys®
look insane, but not to those big enough to get a grip on them. Precision
bends are finely tuned to position the extra tall rider's arms and wrists
at the optimum angle for maximum comfort and control. 1 1/4" Thick,
Knurled, Pre Drilled for Internal Wiring, accepts new electronic throttle with a Brilliant Show Chrome
Finish. Work with stock and most custom controls, grips, risers and top clamps. |
||||
|
CHUBBY® R.G. BARS Sensational 1 1/4" thick customs for the Road Glide. Designed
for maximum comfort and control. They are 31.0" wide, with a
14.5" pullback and 8.5" end rise. They work with the stock
Controls, Grips, Cables, Brake Line & Wiring. Now accepting new electronic throttle. |
 WO517 ON '02 ROAD GLIDE WO517 ON '02 ROAD KING WO517 ON HERITAGE | ||||
 |
CHUBBY® SPRINGER KNUCKLE BARS These sensational looking custom 1 1/4" thick
Knuckle Bars mount on stock springer risers and work with most grips,
stock controls and some custom controls. Pre drilled for internal
wires, knurled, show chrome plated with perfect bends for the ultimate
in style. They go awesome on the FLSTS and work with the stock cables and
brake line. |
||||
|
CHUBBY® 9.5" SPRINGER APES These sensational looking custom 1 1/4" thick bars mount
on stock springer risers and work with most grips, stock controls
and some custom controls. Pre drilled for internal wires, knurled, show
chrome plated and perfect bends combine for the ultimate in style
and comfort. |
 WO514 ON FXSTS |
||||
 WO516 ON FLSTS WO569 ON FXSTS & FLSTS |
CHUBBY® 12.5" SPRINGER APES CHUBBY® 16.0" SPRINGER APES These sensational looking custom 1 1/4" thick
bars mount on stock springer risers and work with most grips,
stock controls and some custom controls. Pre drilled for internal
wires, knurled, show chrome plated and perfect bends combine for the ultimate
in style and comfort. |
||||
|
CHUBBY® DRAGSTER SPRINGER BAR Custom drag bar mounts on stock Springer risers. 1 1/4" thick and 30.5" wide. Like all
Wild 1 Chubbys® they work with most grips, stock controls, various custom controls.
Pre drilled for internal wires and show chrome plated for an awesome look. |
 |
||||
|
CHUBBY® SPRINGER FLSTS® BAR A spectacular look on the Springer Heritage. The ultimate combination of
comfort, control and styling. Fluid bends that provide great hand and wrist
placement for optimum riding position. They work with the stock risers,
cables, brake line & wiring on FLSTS® & FXSTS® models. SPRINGER HERITAGE IS A REGISTERED TRADEMARK OF HARLEY DAVIDSON CORP. |
||||
|
CHUBBY® RISERS |
 |
||||
|
|
|||||
|
|
|
|
|
|
|
||
ORDER HOT LINE -- 1 800-337-8870
Call Toll Free
LOCATE A DEALER
PLACE AN ORDER
CUSTOMER SUPPORT
OUTSIDE THE U.S. - CALL 714 536-5869
© Copyright Wild 1 Inc. all rights reserved
