FREQUENTLY ASKED QUESTIONS

Q: Do your bars work with the HD Heated Grips?
A: Yes. You may have to trim 1/2" off the left side of the 1" section. Bars are designed for
stock rubber grips and HD heated grips are about 1/2" shallower in depth due to heat controler. 

Q: Do your bars work with the electronic throttle on 2008 and up touring models?
A: Yes. All bars we have in stock are notched for the fly by wire controler. 

Q: I want to use a different color powder coat. Do you guys sell bars without the finish on it?
A: Yes we do. You will have to call to order them. We basically deduct the cost we pay for the finish.

Q: Do your bars work with Hydraulic Clutch?
A: Yes. All bars in stock are tapered on both ends for optimum rotation of Master Cylinders. 

 Q: What is your return policy?
A: Go here. 

Q: I want to run my wires outside the bars. Do your bars allow this?
A: No. We want our bars to look clean on your bike so the wiring must be done internaly. 

 Q: I am getting your ape hangers. What cable lengths do I use?
A: Contact our tech department and a representative will be happy to help you.

Q: Are any other parts required for installing your bars on my bike?
A: You may need longer or shorter control cables. If your bike is a touring model 2007 or
earlier you will need Harley part #55918-08 handlebar top clamp. GET ONE HERE!

Q: Do you guys make custom bars?
A: We will not do custom bends. If you want something changed on our bars like no wire holes because you are using custom controls we can handle this. If you have questions on what we will do, please call us.

Our product quality is unsurpassed. Our customer service is second to none.

We have no sales people to pressure you into purchasing something you may not want.

If we can't get you what you want we will send you in the right direction.

We are located in Southern California USA.
All our products are made here also. We will never import products.